Low inertia AC400W servo motor

Low inertia AC400W servo motor
  • Low inertia AC400W servo motor

KingServo has launched a new high-speed drive high-performance AC servo motor and driver. The motor capacity is 200W, 400W, 750W. In the future, 1KW, 2KW, 3KW and medium-to-high inertia servos will be introduced successively, which can meet the needs of various mechanical designs, especially in electronic applications. The industry shows its superior performance. By adopting a high-performance CPU, the speed response frequency is as high as 400Hz, which can meet the requirements of high-speed machinery and greatly shorten the cycle time of machinery. The drive is equipped with a fully closed loop control, 2500p/r incremental encoder as standard, and supports a display for displaying the rotation speed, parameter setting, and test operation (JOG operation), pursuing the convenience of use.

Low inertia AC400W servo motor specifications

  • Rated power: 400W
  • Rated torque: 1.3 (N-m)
  • Instantaneous maximum torque: 3.8 (N-m)
  • Rated speed: 3000 rpm
  • Instantaneous maximum speed: 5000 rpm
  • Maximum power per second: 56KW/s
  • Rotor inertia: 3*10-5 Kg-m2
  • Ambient temperature: 0~40℃
  • Storage temperature: -20~70℃

 

Low inertia AC400W servo drive specifications

  • Input voltage: single-phase/three-phase 200~240 ±10% 50/60Hz
  • Control mode: position mode, speed mode, torque mode
  • Feedback encoder: 2500P/r (10000 resolution) incremental encoder
  • Control method: IGBT PWM sine wave drive
  • Control input signal:
    • Servo-On
    • Control mode switch
    • Gain switching/torque limit switching
    • Alarm clear
  • Control output signal:
    • Servo alarm
    • Servo-Ready
    • Brake release signal
    • Zero speed detection
    • Torque limit
  • Analog input signal: 3 inputs (A/D)
  • Analog output signal: 2 outputs (for monitoring)
    • Speed ​​monitoring
    • Torque monitoring
  • Pulse input signal: 4 inputs. The pulse wave can be input by the line drive (Line Drive) interface or the photo-coupler (Photo-coupler) interface by parameter selection.
  • Pulse output signal: The line driver interface outputs encoder pulse (A, B, Z phase), and the Z phase has an open collector interface output.
  • Regenerative resistor: built-in regenerative resistor (50W)
  • Dynamic braking:
    • Power OFF can be set
    • Servo Off
    • Protection function operation
    • The dynamic brake action program when driving input is prohibited.
  • Control mode:
    • Position control
    • Speed ​​control
    • Torque control
    • Position/speed control
    • Position/torque control
    • Speed/torque control